Facial recognition check-in lets an attendee walk up to a self check-in kiosk, look at the camera and get checked in, with the badge printing straight after. Eventify matches the face against the attendee's profile photo and runs a liveness check first.
Facial Recognition Check-In That Turns A Face Into A Printed Badge
No ticket to dig out and no QR code to find. The kiosk recognises registered attendees, rejects photos held up to the camera and keeps matching offline in Local mode.


Trusted by 5,000+ event professionals at conferences, expos and summits
Facial Recognition For Events, Where The Attendee Is The Ticket
Hunting for a QR code is the slowest moment at a self check-in kiosk. Face check-in takes it out.
- Look, don't search. The attendee looks at the camera, and the kiosk finds the registration, checks them in and prints the badge.
- Built into Kiosk Mode. It sits in the Eventify app on Android and iOS, next to QR scanning and name search.
- Same badges, same list. It uses your onsite badge printing templates and writes each arrival to the list you use for attendee tracking.
- Attendees opt in. They switch facial recognition on or off in the app.
- QR stays as the backup. Anyone without a usable photo checks in by QR code or name.
| Attendee | User group | Face check-in |
|---|---|---|
| Alex Morgan | Delegate | Eligible |
| Sofia Rossi | Speaker | Eligible |
| Tom Becker | Exhibitor | Not eligible |
| Mei Tanaka | VIP | Opted out · QR |
How Face Check-In Works For The Attendee
A self check-in kiosk with badge printing in four moments, and no typing.
Walk up and look
The kiosk reads the largest face in view and guides the attendee with prompts like Move closer and Hold still.
Matched and verified
A square frames the face, it is matched to the profile photo, and a liveness check rules out photos and screens.
Checked in
The arrival lands on your check-in dashboard, recorded exactly like a QR scan.
Badge prints
The badge prints through your usual setup, with Auto Print, Auto Check-in and Allow Check-in Only unchanged.
Open A Face Lane Next To Your QR Kiosks
Set Up Facial Recognition Check-In In Three Steps
Face check-in runs inside Kiosk Mode of the Eventify event check-in app.
Turn on the module
In the admin panel, go to Setup, Features. Under Modules, switch on Face Recognition and save.
Add it as a check-in method
In Registration, Badge Printing, Kiosk Setup, tick Facial Recognition. Keep QR Scan and Search ticked as a fallback.
Enable it on each kiosk
Open Kiosk Mode, run a Full Sync, tap Settings and turn on Enable Face Recognition. Pick Local or Server recognition.
Kiosk devices need Eventify app version 3.1.49 or later. Using a white-label app? Make sure you have the latest build. The setup guide covers every screen.
Offline Facial Recognition Check-In, Built For The Venue Floor
Patchy Wi-Fi, mixed lighting and attendees without a photo: face check-in is designed around a real registration desk.
Liveness detection
Only a real face in front of the camera checks in. A printed photo or a phone screen shows Face verification failed.
Offline matching
In Local mode the kiosk matches faces on the device from its last sync. Check-ins send when the connection returns.
Server mode for big lists
Prefer to match in the cloud? Server mode suits very large attendee lists and devices that struggle to match locally.
QR and search fallback
Run face and QR on one screen. Unrecognised faces are asked to scan their QR code instead.
Face-only kiosks, staff override
Set a kiosk passcode. Staff tap Report an issue, enter it, and QR and search come back for 60 seconds.
Per-device control
Every kiosk has its own switch, so the main entrance can run faces while the side door stays on QR.
Onsite badge printing
A face match triggers the same badge templates and printers as a QR scan, so your printing setup stays as it is.
Attendee opt-in
Attendees switch Allow facial recognition on or off in the Eventify app. Anyone who opts out uses their QR code.
Photo eligibility flags
Manage Attendees marks anyone whose photo cannot be used, so you can chase updates before doors open.
No Photo On File? Their QR Code Still Works
Run face and QR side by side and nobody gets stuck. See both methods on one kiosk in a 30-minute demo.
The Event Check-In Kiosk, Screen By Screen
No dead ends: every screen tells the attendee what to do next.
Ready
Face and QR both on. The attendee looks at the camera or holds up their code.
Matched
The face matched a registered attendee and passed the liveness check.
Printing
The badge prints and the attendee is checked in, as after a QR scan.
Fallback
No match, often because of strong backlight. The attendee scans their QR code or searches by name.
Blocked
A photo or a screen was held up to the camera, so nobody checks in for someone else.
Needs sync
The kiosk has no attendee data yet. Staff run Full Sync and face check-in comes back.
Face, QR Or Search: Picking A Method In Your Event Check-In Software
You do not have to choose one. Most events switch on face check-in with QR as the backup.
| Facial recognition | QR code scan | Name search | |
|---|---|---|---|
| What the attendee needs | Just their face | Ticket on a phone or printout | Their name or email |
| What can slow the line | Poor lighting or no profile photo | Finding the ticket email | Typing, similar names |
| Works offline | Yes, in Local mode | Yes, on synced kiosks | Yes, on synced kiosks |
| Stops ticket sharing | Yes, face plus liveness check | Partly, a code can be forwarded | No |
| Setup needed | Profile photos, module switched on | None, codes go out automatically | None |
| Best for | Main entrance, VIP lanes, repeat arrivals | Every attendee, as the default | Lost tickets, walk-up help |
All three share one attendee list, one set of badge templates and one live dashboard in Eventify event check-in software.
Watch A Face Match Print A Badge
Book 30 minutes and see the whole flow on a real kiosk, from switching the module on to the printed badge.
- The Face Recognition module switched on
- Kiosk Setup with face, QR and search
- Test profiles synced to a kiosk
- A badge printed from a face match
Biometric Event Check-In That Attendees Control
- Liveness on every match, so photos and screens are rejected.
- Only the profile photo the attendee chose to upload is used.
- Opt out any time in the Eventify app, and check in by QR code instead.
- Unusable photos are flagged in Manage Attendees before the event.
- Eventify is ISO 27001:2022 certified, SOC 2 Type 2 audited and GDPR compliant, with TLS 1.3 in transit and AES-256 at rest. See Eventify security.
Get A Fast Face Lane On Day One
What we tell every event team before their first face kiosk goes live.
Ask for photos early
Request a clear, front-facing profile photo in your registration emails, then chase anyone flagged as not eligible.
Light faces from the front
Keep windows out from behind the attendee. Strong backlight is the most common cause of Face not recognised.
Mount at face height
Put the tablet camera near eye level. People looking down at a screen from above are harder to match.
One person at a time
The kiosk works on the largest face in view. Mark a spot on the floor so the next attendee waits a step behind.
Full Sync before doors open
The kiosk only knows attendees it has downloaded. Sync again after late registrations or setting changes.
Test with your staff
Add staff photos, turn on Face Recognition Preview and run a few check-ins. Switch the preview off before the event.
Give Your Main Entrance A Face Lane
Keep your QR kiosks, add one face kiosk where the crowd is biggest, and compare the two lines on the dashboard.
Where A Face Kiosk Earns Its Place
Running an event in India? Our team can also run on-site badge printing in India, with a face kiosk at the desk.

Conferences and summits
Touch-free face lanes beside the staffed desk for the first-morning rush, with QR for anyone without a photo.
- Faster first-morning arrivals
- Speaker and VIP lanes
- Day 2 and day 3 arrivals per date

Expos and trade shows
High-volume arrivals where every second counts and badges must not be passed between visitors.
- Several face kiosks in parallel
- Liveness check against ticket sharing
- Badge QR reused for lead scanning

Corporate and internal events
Ask employees to add a profile photo during registration and most of the room is ready for face check-in.
- Sales kickoffs and town halls
- Training days and offsites
- Branded event app for the day

Associations and member events
Confirm the person at the kiosk is the registered member, for AGMs and members-only sessions.
- Face matched to the member's photo
- Attendance export per date
- QR fallback for opted-out members
Facial Recognition Check-In FAQs
What is facial recognition check-in for events?
Does facial recognition check-in work offline?
How does liveness detection stop photo spoofing?
What happens if an attendee's face isn't recognised?
Can attendees opt out of facial recognition?
How does face recognition check-in work at the Eventify kiosk?
What do attendees need for face check-in?
Why does the kiosk fail to recognise some faces?
Which devices can run a facial recognition kiosk?
Can I use face check-in and QR code check-in on the same kiosk?
How do I set up facial recognition check-in?
See A Face Kiosk Check In Your Own Attendees
Book a 30-minute walkthrough. We switch on facial recognition, sync a few test profiles and print a badge, so you can see how your door will run.
- Face, QR and search side by side on one kiosk.
- Liveness check tested with a photo.
- No card required to demo.
99% positive · 68 reviews · Leader, High Performer and Best Support badges